Flókaslípibelti VB frá PFERD
Breidd: 30 mm
Lengd: 533 mm
Grófleiki: A100 G
Non-woven abrasive belt VB 30x533 mm A100 G for fine grinding and finishing with a pipe belt grinder.
Suitable for general work on surfaces such as metal tubular structures, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".
POLIVLIES grit size 100 G = coarse (yellow-brown)
Materials that can be worked:
Aluminium
Annealed cast iron
Brass
Bronze
Cast steel
Cobalt-based alloys
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Thermoplastics
Titanium
Titanium alloys
Zinc
Applications:
Deburring
Leveling
Sharpening
Step-by-step fine grinding
Working on edges
Work on weld seams
Drive types:
Belt grinders and belt arms
